Garage door
opening
Preview at 1/4" = 1'-0" scale
About
Overhead sectional garage door — drawn as a wide dashed line along the wall with panel-division ticks. NOT a swinging door.
Specifications
| Default size | 9' wide × 0.4' deep × 7' high |
|---|---|
| Elevation off floor | 0' |
| Drafting standard | NCS V7 §Doors; AGS Garage Door Symbols |
| 3D-ready | Yes |
Variants
- Single 9' 9' × 0.4'
- Double 16' 16' × 0.4'
- Double 18' 18' × 0.4'
Interaction in plans
- Hover for tooltip
- Click for details
- Drag to relocate
- Swap to another symbol
- Rotate (0/90/180/270)
Codes & best practices
RequiredRequired when this symbol is placed
Garage door + pedestrian door requirements
LS-GARAGE-DOOR-01 · ICC
Every garage must have exactly one garage_door opening on an exterior wall, plus at least one garage_pedestrian door connecting to an interi…
TypicalTypically applies
Garage / dwelling fire separation
IRC R302.6 · ICC
Walls and ceilings between an attached garage and the dwelling must be separated by at least 1/2-inch gypsum board on the garage side. Doors…